FAQ2021-12-22T03:51:52+00:00

FAQ

Some of our most common questions are answered below:

GENERAL QUESTIONS

What happens if the main power to the building is cut?2021-11-30T03:48:51+00:00

Density Foggers utilize a battery backup system that provide up to two hours of operation in the event of a power loss.

What activates the fog system?2021-11-30T03:49:29+00:00

Density Foggers are designed to be connected to your existing alarm systems, which when triggered, will activate the fogging system. The system can also be remotely activated through the Active Cloud desktop or mobile solutions.

Do I have to replace the fluid after each activation?2021-11-30T03:50:17+00:00

The number of activations is based on duration of deployment, which is variable and dependent upon the cubic feet of the space to be filled with fog, however, at maximum duration, the system will have up to 4 activations before the fluid will need to be replaced.

INSTALLATION QUESTIONS

Can I install it myself?2021-10-21T14:22:27+00:00

It is recommended that installation be completed with the help of your alarm system provider.

Does it connect to an existing alarm system?2021-11-30T03:50:45+00:00

The Density Foggers are designed to integrate with existing alarm systems.

Is the machine visible to customers?2021-11-30T03:51:05+00:00

Although designed to be unobtrusive, the Density Foggers will be visible to customers in their mounted positions.

Does the system require routine maintenance or service?2021-11-04T17:01:22+00:00

With the Active Cloud desktop or mobile solution, maintenance is generally limited to replacement of the liquid fog component which must be replaced annually whether the system has deployed or not.

SECURITY FOG QUESTIONS

Is the fog safe for people and pets to touch or inhale?2021-10-21T14:19:35+00:00

The security fog is tested safe for people, pets and leaves little to no residue.

Will the fog damage my property?2021-10-21T14:20:18+00:00

At 1 micron in size, the fog will not damage any surfaces it contacts and leaves little to no residue.

How fast does the fog fill a space?2021-11-30T03:52:02+00:00

The Density 900 will fill 735 sq ft with a 12 ft ceiling in 10 seconds.
The Density 2400 will fill 1,030 sq ft with a 12 ft ceiling in 10 seconds.

How long does it take to dissipate?2021-11-04T17:02:13+00:00

A typical application with no air handling equipment activated can take 45 minutes to an hour to dissipate.

Does it leave a residue?2021-10-21T14:21:41+00:00

At 1 micron, the fog will leave little to no residue on surfaces it contacts.

Don’t See Your Question?

Ask Us!

CONTACT DENSITY USA TODAY

If you are interested in learning more or would like to schedule an appointment for a system consultation, please contact us today. Installing your Density System now can help prevent tomorrow’s theft.

Thank you for your message. It has been sent.
There was an error trying to send your message. Please try again later.
Go to Top